1

Copyright © Shanghai Honesty Fine Chemical Co., LTD .

Focus on Wechat

Public Number

PRODUCT CENTER

一 产品中心 一

>
>
Additives For Coating & Ink
Page view

Additives For Coating & Ink

➣Selection of small stickers: ADT-950 with the increase of the amount of added,
peeling force showed an upward trend.

➣Selection of small stickers: WET-750 has a low surface tension, 0.2% of the
addition, static surface tension can reach 22 dynes/cm.

➣The small paste shows that EFS-407 is especially suitable for coating system. It
can first be added to the powder to disperse first, then add the emulsion, which is
beneficial to improve the chemical stability of the emulsion in the powder.
没有此类产品
Products Detail
Auxiliaries series type Form Consumption purpose Characteristic
      WT% adhesive printing ink Architectural coatings Textile coatings Paper coating  
AP-95 Neutralization aid Organic amine 0.1-1%   * * * * Multifunctional pH Regulator, Low Ammonia Flavor Release
ADT 950 Tackifier Rosin tackifier 1-10% * *     * When used in water-borne adhesives, the peeling force can be increased. For example, label glue and other glue that requires high peeling force.
S-703 Dispersant Anionic carboxylate 0.1-5% * * * * * Good dispersion effect, good color development, stable viscosity, low foam
S-705 Anionic carboxylate 0.1-5% * * * * * Good dispersion effect, good color development, stable viscosity, low foam, especially suitable for the dispersion of anatase titanium dioxide
L-808 Wetting agent Polyether Modified by Organosilicon 0.1-1% * * * * * Improve excellent wetting ability, especially for hard-to-wet substrates, no APEO
WET-60 sulfosuccinate 0.1-1% * *   * *
WET-85 sulfosuccinate 0.1-1% * * * * *
WET-750 polyether 0.1-1% * * * * *
OT-70 sulfosuccinate 0.1-1% * * * * *
OT-75 sulfosuccinate 0.1-1% * * * * *
P-100 Wetting agent polyether 0.1-3% * * *   * Excellent wettability, giving excellent stability of calcium ions to emulsions.
After adding wetting stabilizer to improve chemical stability and bearing capacity of pigments and fillers
TX-405 polyether 0.1-3% * * *   *
EFS-373 Wetting agent polyether 0.2-3% * * * * * The Wetting agent with low foaming property has no APEO and good wettability, giving the emulsion excellent calcium stability
After adding wetting stabilizer to improve chemical stability and bearing capacity of pigments and fillers
EFS-407 polyether 0.1-3% * * * * *
DF-523 Defoamer mineral oil 0.1-1% *   * * * Quick defoaming, lasting effect, containing silicone, used in building coatings
DF-528 Defoamer mineral oil 0.1-1% * * * * * Fast defoaming, durable, acid and alkali free, silicone free, for building emulsion.
DF-538 Defoamer mineral oil 0.1-1% * * * * * Quick defoaming, durable performance, acid and alkali resistance, no silicone, used in pressure sensitive adhesives
DF-568 Defoamer mineral oil 0.1-0.7% * * * * * Rapid defoaming, durable performance, good compatibility, can be used for pressure sensitive adhesives
DF-588 Defoamer mineral oil 0.1-0.8% * * * * * It is suitable for the coatings, inks and adhesives with the best defoaming effect, long term effect, and emulsion system with various emulsion systems. The broad spectrum Defoamer is used. With excellent film compatibility, it can achieve high transparency, flawless coating. Durable defoaming capacity in compliance with FDA regulations
DF-589 Defoamer 有机硅 0.1-0.8% * * * * * Efficient defoaming ability, excellent compatibility, flawless coating. Durable defoaming capacity in compliance with FDA regulations
FOAM S-300 Foam stabilizer Aliphatic alkanolamide 1-5% *     *   Foamed emulsion stabilizer, fine foam.
FCS-100 Fluorocarbon additives Fluorocarbon 0.05-1% * * * * * Low surface tension, excellent wettability, at the same time give the paint film anti-fouling, no APEO
KIL-100 Fungicide and antifungal agent Isothiazolinones 0.1-0.5% * * * * * Isothiazolinones,Broad spectrum sterilization, no formaldehyde, can be used in various emulsion systems.
KIL-300 Fungicide and antifungal agent Isothiazolinones 0.1-0.5% * * * * * Isothiazolinones,Broad spectrum sterilization, no formaldehyde, can be used in various emulsion systems.
KIL-BIT20 Fungicide and antifungal agent Isothiazolinones 0.1-0.5% * * * * * Broad-spectrum sterilization, widely used in water-borne resins, coatings, acrylic polymers, leather, ink, water treatment agents
KIL-P100 Fungicide and antifungal agent 2-溴-2-硝基-1,3-丙二醇 0.1-0.5% * * * * * Broad-spectrum sterilization for water-borne chemicals, water treatment, etc.
KIL-BM5 Fungicide and antifungal agent Isothiazolinones 0.1-0.5% * * * * * No VOC, no CMIT, no formaldehyde
LEV-202 Leveling agent Polyurethane type 0.1-2% * * * * * Non-ionic environmental protection, providing good leveling of coatings
Protective adhesive Sodium polymethacrylate 0.3-2% * * * * * It plays an effective protective role in the formation and stability of latex particles in polymerization system. It can significantly reduce the amount of condensed slag and improve the mechanical, chemical and cold and hot storage stability of emulsion, without APEO.
TCK-35 Acrylic thickener Acrylic type 0.1-0.5% * * * * * Environmentally friendly alkaline swelling and thickening agent with flow leveling to meet the requirements of different viscosity and pseudo plasticity of emulsion, without APEO
TCK-60 Acrylic thickener Acrylic type 0.1-0.5% * * * * * Environmentally friendly alkali swelling and thickening agent to meet the requirements of different viscosity and pseudo plasticity of emulsion, no APEO
TCK-110 Polyurethane Thickener Polyurethane type 0.1-0.5% * * * * * Neutralization without neutralization, versatility, suitable for emulsion of cationic system, no APEO

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article
龙头彩票开户 旺彩彩票平台 喜盈盈彩票开户 钱多多彩票开户 博宏彩票注册开户投注平台 湖北快3 利新彩票开户注册投注 利新彩票开户注册投注 湖北快3走势 福祥彩票注册开户投注平台